[ more ] Schluter®-KERDI-BOARD-SC

all > Schluter® > prefabricated substrates

Prefabricated waterproof shower curb

Schluter®-KERDI-BOARD-SC is a lightweight, waterproof, prefabricated shower curb made of KERDI-BOARD that is designed to integrate with the Schluter®-Shower System.
[ shop ]

Designed to integrate with the Schluter®-Shower System

  • Lightweight, stable, and load bearing
  • Waterproof and ready to tile
  • Multiple curbs can be installed adjacent to each other for larger showers
  • Quick and easy to install
  • Available in three sizes

FUNCTION

Schluter®-KERDI-BOARD-SC is a prefabricated shower curb, made of KERDI-BOARD, for use in conjunction with the Schluter®-Shower System. KERDI-SHOWER-SC is waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing. The curb can be used in conjunction with KERDI-SHOWER-T/-TS/-TT shower trays or mortar bases and is available in three sizes, 38" x 6" x 4-1/2" (97 x 15 x 11.5 cm), 48" x 6" x 4-1/2" (122 x 15 x 11.5 cm) and 60” x 6” x 4-1/2” (152 cm x 15 cm x 11.5 cm).

INSTALLATION

  1. Apply Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar to the floor and to the edge of the shower base and walls using a 1/4" x 3/8" (6 mm x 10 mm) square- or U-notched trowel.
  2. Press the curb firmly into place. Check the underside of the curb to ensure that full coverage and support is achieved.
  3. Seal the curb to the shower base and walls using KERDI-BAND waterproofing strips and KERDI-KERECK preformed waterproofing corners.

For complete installation guidelines and warranty criteria for shower applications, please see the Schluter®-Shower System Installation Handbook.

 

Back to blog